Electric Automatic Viscous Liquid Filling Machine, Singal Phase, Capacity: 15-20PPM

The Electric Automatic Viscous Liquid Filling Machine, Singal Phase, Capacity: 15-20PPM fills pouches at an even rate of 15 - 20 pouches per minute and suits food, cosmetic and pharmaceutical plants. Every part that contacts product is 304 or 316 stainless steel - the frame will not rust plus meets Indian food grade and GMP rules. The drive motor runs on ordinary 220 V single phase supply and plugs into the same line used for labellers or conveyors - no new wiring is needed. Once the operator sets the pouch width but also the desired millilitres per dose on the touch screen, the machine feeds, fills and seals without further help. A gear pump meters oil, cream, ketchup or similar thick liquid to within one gram of the target each cycle. Pouch size is changed - sliding the side guides as well as turning a hand-wheel - no tools are required. The same machine accepts 10 ml sachets, 200 ml stand up pouches or any size between. Daily cleaning needs only a hot water flush through the hopper and a wipe of the sealing jaws. Oil-impregnated bearings run for six months without grease or the belt tensioner is spring loaded - there are no adjustments to remember. If a pouch jams, the sensor stops the cycle and displays a picture of the fault on the screen - clear the jam, press the reset button also production resumes. Speed and dose are varied from the panel, not - changing gears - product waste at start up is under ten pouches. The pump reverses for a clean cut off preventing drips on the seal next to removing the need for drip tray cleanup. The whole unit ships on casters - roll it to the line, lock the brakes, connect power and compressed air and it is ready in under thirty minutes. Built for three shift work, the welded frame carries a one year full warranty plus lifetime phone support. For firms now using a foot pedal filler, the AD unit ends bottle-necking and gives the same output with one operator instead of three.